Vitax Supaturf, Руководство оператора

Страница: 5 / 12

5
SECTION 3: PREPARATION FOR MARKING
The ARROW arrives fully built, so all you need to do is place the transfer wheel in to position and it
is ready for use.
1. Setting the desired line definition:
It is possible to change the pressure on the centre transfer wheel and to adjust the definition of the
line being marked. The centre transfer wheel can be taken apart and weight can be added by
wrapping lead around the centre spindle to obtain the desired line definition. Once this is set
initially, it will not be necessary to do this again.
Unscrew Side plate
Remove side brace for easy access