Getting Started
4
1.
Connect the RCA audio cable from the Analog audio-in port of the Base Unit to the RCA audio-out port of the TV set
2.
Connect the USB power adaptor to the Base Unit power port
3.
Put the Handset to the Base unit charging dock for battery charging. It is recommended to charge 5 hours for the first use
4.
After charging, put on the neck strap
5.
Plug the headset to the headset port on the Handset
6.
Power on the TV set
7.
Press the power button to power on the Base Unit, power indicator will be lit up in red color
8.
Press the power button to power on the Handset, the power indicator will be flashing
9.
When the Handset is connected to the Base unit, the power indicator will turn to solid green. TV sound will be played through the
headset.
10.
Press the volume button to adjust the volume level. Press the button for increasing the volume level and press the button for
lowering the volume level. Volume level indicator will be lit to present the volume level.
11.
Severely hearing-impaired persons can turn the volume booster switch on and increase the volume output level.
Except in special circumstances, please keep using the normal volume output
12.
Press the EQ mode button to select different preset compensated EQ modes. EQ indicator will show which mode (1, 2, 3 & 4) is
selected. EQ compensation for each person is different, select one of the modes according to the personal preferences.
13.
Indicators & will be lit during any operation. The Handset will enter to sleep mode (to save power) if no more operation in process after
40 seconds. All indicators will be turned off automatically.
14.
Press and hold the power button will turn off the Handset. Power indicator will be lit out. Press and hold the power button will turn
off the Base Unit. Power indicator will be lit out
15.
For detailed instructions, please refer to the following manual
15
19
14
1
13
12
3
6
6
9
7
4
5
5
6
3
6
13
12
8