5
CONTINUED ON PAGE 6
Setting Up The PBS
Place the PBS on a sturdy, level surface or counter.
Packaged inside the Ice Bin are items necessary for the operation of the PBS. Remove the
Ice Bin Lid and take out the following items:
• Container
• Container Lid with Lid Plug
• Ice Chute
• Drain Kit
• Splash Guard
• Drive Socket Kit
Level Feet Adjustment - Use a level and adjust the feet on the bottom of the
machine to level your PBS on the counter. With the Ice Bin Lid removed place
a level on top of the Ice Bin while adjusting the feet. Turn the feet to raise or
lower the machine and use the adjustment nut to tighten and lock them in
place.
DO NOT
unscrew the feet so
that the threads of the feet
become exposed.
Splash Guard - The Splash
Guard attaches to the Ice Chute
and is used to loosely cover the
container during operation
(Figure A). The Splash Guard
should not touch the container.
Ice Chute - Slide the Ice Chute and Splash Guard over the
Blade Cartridge located on the underside of the Ice Bin (Figure B). The Ice Chute and Blade
Cartridge will click and lock together indicating proper placement.
Ice Shelf Placement
WARNING:
To reduce the risk of injury
unplug the unit before reaching inside the ice
bin. Do not operate without lid in place.
The Ice Shelf rests inside the Ice Bin and helps separate and
distribute the ice cubes for shaving. The shelf may have shift-
ed during shipping and unpacking and should rest level
inside the Ice Bin with the inner lip facing down. The Ice
Shelf will be removed for cleaning but should always be prop-
erly replaced before adding ice.
Drain Hose Installation
Drain Hose - The drain hose is attached to the bottom of the machine. The opposite end of
the hose extends about 5’ (1.5 m) and will need to be placed in a sink or bucket. The end of
the hose must not be submerged in water at any time. Also, the drain hose must be free
of kinks and bends and must not rest above the level of the drain hole located just behind the
container. See ‘Using the Drain Hose Kit’ on the next page, for further instructions.
Ice Chute
Figure A
Splash Guard
Ice Bin Lid
Ice Shelf
Ice Bin
Blade
Cartridge
Figure B