Vitals EST 8.5-3b, Руководство по техническому использованию

Страница: 15 / 59

Power stations equipped with modern fuel efficient engines that are
designed for long-term and continuous operation. Nevertheless, it is
important to hold regular simple maintenance work described in this section.
Maintenance is recommended that an experienced specialist. In case of
difficulties should request assistance from a professional mechanic.
Table Power Station Maintenance Schedule
WARNING !
Before you begin to carry out any maintenance work at the
power station, turn off the engine and disconnect the ignition
wire from the spark.
MAINTENANCE MAINTENANCE
6
2 9 2 8
+
+
+
+
+
+
**
+
*
+
*
+
*
+
+
*
+
+
+
+
+
*
+
*
+
* *
MAINTENANCE /
RECCOMENDED TERMS
First 25
work hours
or 1 month
Every 50
work hours
or
3 months
+*
Every
work hours
or 6
months
100 Every
300 work
hours or
1 year
Every time
Cleaning
Tightening
Checking
Change
Change
Checking
Cleaning
Change
Gap check , cleaning
Change
Gap check ,
Cleaning
Checking for
damages
Checking
Cleaning
Cleaning
Checking
Change
Every 3 year or when needed
Power station
entire
Connections and
fastenings
Motor oil
Oil filter
Air filter
Spark plug
Valves
Spark catcher
Cooling system
Ignition system
Precipitation tank
Fuel tank and filter
Fuel pipe
EN
G
LI
SH
EN
G
LI
SH
CLEANING
Cleaning of the power station should be carried out after each use and
before refilling engine with oil and fuel. It is not allowed to use the power station
with oil and fuel stains. It should be remembered that the dust in the engine oil
or fuel significantly reduces the engine life. Do not let the dust in generator of
electric current, otherwise it may fail.
CONNECTIONS AND FASTENINGS
Power stations are equipped with internal combustion engines that
generate vibration. Vibration is transmitted to the connections and fasteners.
Check regularly the tightness of all bolts and nuts and avoid job without any of
them. In addition, it is necessary to observe the state of shock absorbers and
engine generator. Defective shock absorbers will cause excessive vibration
transmission.
* - it is recommended more frequent maintenance when used in dusty area generator
** - this type of work should be carried out by a qualified technician
ATTENTION !
Check the rubber damper for wear or damage. Damaged
shock absorbers should be changed immediately.
These models of power stations are equipped with worked hours timer. You
can measure the worked hours every moment the power station is working.
You can measure the passed worked hours. This allows to carry out the
maintenance works with strict accordance to the schedule.
Carrying out the maintenance with strict accordance to the schedule
increases the life time several times.
To see the worked hours in the numeric display press SELECT , until the
LED opposite to H is on. H is for hours.
The power station should be set on a flat surface in order to
ensure sufficient oil lubrication of the engine.