EN
Instructions
Customer Service / Importer:
DS Produkte GmbH, Am Heisterbusch 1, 19258 Gallin, Germany •
✆
+49 38851 314650 *)
Calls to German landlines are subject to charges. The cost varies depending on the service provider.
All rights reserved.
Device Overview
1
Cover
2
MIST operating
lamp
3
MIST switch
4
LIGHT switch
5
Connecting
socket for mains
adapter (bottom
of the device)
6
Main device
7
Locking catch for
the cover
8
LEDs
9
Water reservoir
2
6
8
9
4 3
5
1
7
Before Initial Use
Check the device for any transport damage. If you
fi
nd any damage
to the device, do not use it (!), but contact our customer service
department. Remove any possible transport protection.
Use
1. Plug the mains adapter into the con-
necting socket (
5
) on the device.
2. Place the device on a table or an-
other dry,
fl
at, solid and moisture-
resistant surface.
3. Remove the cover (
1
) from the device by twisting it anticlock-
wise and pulling it up and away from the device.
4. Fill the water reservoir (
9
) with wa-
ter (max. 100 ml) using a measuring
cup or something similar. If neces-
sary, add 2 – 3 drops of essential oil.
5. Place the cover back on the device
and twist it clockwise to secure it in
place. You must hear and feel the
cover engage.
6. Connect the mains adapter to an easily accessible socket.
7. Switch on the device and select the mode you want:
Diffuser
Hold down the
MIST
switch (
3
) for approx. 3 seconds. The de-
vice emits a beep and the operating lamp (
2
) lights up green.
The device starts to evaporate the water.
By pressing the
MIST
switch multiple times, the following
modes can be selected:
–
30 seconds ON / 10 seconds OFF
– green operating lamp
–
3 hours ON
– yellow operating lamp
–
C
onstantly ON
– red operating lamp
–
OFF
(two beeps are heard)
The device switches off automatically if there is no longer
any water in the water reservoir.
Light / changing colour
Hold down the
LIGHT
switch (
4
) for approx. 3 seconds. The
LEDs (
8
) turn on.
By pressing the
LIGHT
switch multiple times, various colour
modes can be selected in the following order: Changing col-
our
→
red
→
green
→
blue
→
yellow
→
turquoise
→
pink
→
white
→
changing colour
To switch off the light function, hold down the
LIGHT
switch for
approx. 3 seconds. Two beeps are heard.
The diffuser and light function can each be used indepen-
dently of one another.
8. When the device is not in use, pull the mains adapter out of the
plug socket and out of the device.
Cleaning and Storage
• Clean the water reservoir (
9
) with a damp cloth and a little mild
detergent if necessary to remove any oil residues.
• If necessary, wipe down the device with a slightly damp cloth.
Then dry all parts thoroughly.
• When not in use the device should be stored in a dry place
which is not accessible to children and animals.
Troubleshooting
If the device does not work properly, check whether you are able to
rectify the problem yourself. If the problem cannot be solved with
the steps that are listed, contact the customer service department.
Do not attempt to repair a defective
electrical device
yourself!
If the device does not work, check the following:
• Have the device and mains adapter been connected to each
other correctly?
• Is the mains adapter inserted in the plug socket correctly?
• Is the plug socket defective? Try another socket.
• Check the fuse of the mains connection.
• Is there any water in the water reservoir (
9
)?
Technical Data
Article number:
02658
Model number:
SYF402
Voltage supply:
5 V DC, 1 A
Power: 5
W
Evaporation volume: approx. 20 – 30 ml / h
Water reservoir:
100 ml
Mains adapter:
Model: XZ0500-1000WU
Input voltage:
100 – 240 V ~ 50 / 60 Hz
Output voltage:
5 V DC, 1 A
Protection class:
II
Disposal
Dispose of the packaging material in an environmentally
friendly manner and take it to a recycling centre.
Dispose of the device in an environmentally friendly manner
at a recycling centre for used electrical and electronic devic-
es. More information is available from your local authorities.
Z 02658 M DS V1 0318
Article number: 02658
