![background image](http://html.mh-extra.com/html/vitalmaxx/05110/05110_operating-instructions-manual_1034451018.webp)
EN
18
Control Panel
9
10
11
12
13
14
15
19
18
17
16
9
: Stand-by on / off
10 ON
: Start
11
Timer / programme display:
Remaining time in minutes, active
programme
12
Receiver (remote control)
13
Display of speed
:
vibration level
14 OFF
: Stop
15
P
: Programme selection
16 SPEED +
: Increase vibration level
17 SPEED –
: Reduce vibration level
18 TIME +
: Increase workout time
19 TIME –
: Reduce workout time
Remote Control
21
23
24
20
22
20
Increase vibration level
21 P
Programme button
22
Reduce vibration level
23
Start / Stop
24
Stand-by on / off
Before Initial Use
1. Before using the device for the fi rst time, remove all packaging materials and any
labels that may be on the device and are used for protection during transportation or
for advertising.
Never remove the rating plate or any possible warnings.
2. Insert the battery into the remote control (see “Inserting / Changing Battery in the
Remote Control”).
Inserting / Changing Battery in the Remote Control
Before inserting the battery, check whether the contacts in the remote control and on the
battery are clean, and clean them if necessary.
1. Unscrew the battery compartment on the back of the remote control by using a coin
or similar item to turn it towards
OPEN
.
2. Take out the used battery and insert a new battery (3 V, CR2025 type). The positive
pole must be facing upwards.
3. Insert the battery compartment cover and twist it towards
CLOSE
to close it.
Replace the battery when the power of the remote control starts to wane.