EN
18
Buttocks
Thighs
Calves
The belt can be used to
fi
x the device to the body. To do
this, place the belt (
5
) through the hand loops (
3
).This
provides more freedom of movement without the device
slipping quickly.
Operating the Device
1. Connect the mains adapter to the connecting cable (
4
) on the device.
2. Insert the mains adapter into an easily accessible socket.
3. Place the massage balls (
1
) of the device onto the part of the body which is to be
massaged (see the “Areas of Application” section). For a shoulder or back massage,
place the straps of the device around your shoulders and
fi
x them in place either
with the belt (
5
) or with your hands. To do this, place either your arms or the belt (
5
)
through the hand loops (
3
). If necessary, close the belt (
5
) with the hook and loop
fastener.
4. Press the
ON / OFF
button to start the massage. Use the control panel (
2
) to select
the function you want (see the “Items Supplied and Device Overview” chapter, “Con-
trol Panel” section).
5. After 15 minutes the device automatically switches off. To switch it off sooner, press
the
ON / OFF
button.
6. Pull the mains adapter out of the plug socket and clean the device if necessary.
Cleaning and Storage
PLEASE NOTE!
■
The device may not be connected to the mains and must be completely switched off
for cleaning and maintenance!
■
Do not use any caustic or abrasive cleaning agents for cleaning. These can damage
the surface.
• Wipe down the device just with a damp cloth if necessary. Then wipe it down fully
with a dry cloth.
• Do not wind the mains cable around the device or the mains adapter.
• Keep the device in its respective packaging in a dry place which is protected from
sunlight and is not accessible to children and animals.
