If you choose time range, you are given a table of time slots. Activate a slot
by clicking its checkbox. The system automatically provides a time bracket for
that slot; you can adjust the time by clicking and dragging the dividers in the
graphical timeline at the bottom of the window (note that the up/down arrows
in the time boxes don’t work in this interface). Then, for each slot, use its
corresponding dropdown to pick the camera’s activity.
If you choose day/night status, use the dropdowns to select the camera’s
behaviors during daytime and nighttime.
At the bottom, buttons allow you to save your changes, restore system defaults,
or import or export a custom schedule file.
Basic Set
This section adjusts the physical parameters of the camera’s operation.
Basic Information
Auto Flip Enable:
This auto-rotates the picture when it tilts past 90°.
Preset Freeze Enable:
If this is on when the camera moves to a new preset, it
won’t update the video image until the camera is at the new preset.
Enable Digital Zoom:
Without this, cameras cannot move beyond the
mechanical limitation on their zoom level. When this is enabled, using
the Zoom + button beyond the camera’s mechanical limitation causes the
camera to switch automatically to digital zoom. However, digital zoom may
cause a grainy image.
Enable Preset Snapshots:
Automatically saves a snapshot to the camera’s SD
card when a new preset is called.
Enable Proportion Zooming:
This moderates the camera’s pan speed in
proportion to its zoom value, so that panning at high zoom is not just a blur.
Enable Scan Record:
When enabled, the camera records while scanning, and
saves it to the camera’s SD card.
Enable Mode Record:
When enabled, the camera records while in pattern
mode, and saves it to the camera’s SD card.
Tilt Angle Adjustment:
The camera’s nominal zero point may still leave
mechanical space that the lens can move upward. This allows you to re-zero
the camera and use that space.
Control Speed:
Sets the maximum control speed.
Zoom Speed Level:
Sets the maximum zoom speed.
Temperature Control Mode:
Decides how your camera handle temperature.
Auto Stop-time(s):
For cameras with auto-tracking, this sets the time for the
camera to stop PTZ movement since the last manual operation.
