TMC 3
September 2017
Visual Engineering
Video solutions. Integrated
visualengineering.co.uk
Page 21
Timed Recordings
There are 4 options for timed recordings, these are; Off, Continuous, Once and Daily.
Off = No recording takes place.
Continuous = Recording Continuously.
Once = Record once when the start time is reached and record for the set duration.
Daily = Record daily starting when the start time is reached and record for the set duration.
Trigger Recordings
Trigger Recordings can be triggered by either motion or light level change.
Trigger recordings are disabled by default, if enabled, a recording will be made.
The duration of the recording will be the duration of the motion event plus the time set in seconds
in the trigger duration.
Alert Control
Additionally motion and light level triggers can be used to trigger an OSD (On Screen Display) event
and an audible tone in the stream. If users require this they should enable the Motion or Light OSD.
The level of motion required to invoke a trigger can be set with the Trigger Sensitivity.
Four options; Off, Low, Mid or High sensitivity may be set.
SD Card Management
In the event of the SD card becoming full, there are two options for Overwrite Control. One option
is to have the recordings stop when the SD card is full, or the other option is to have the oldest
material to be overwritten when the SD card becomes full.
Following any changes made in the menu the user must press the
submit
button .The camera will
then save the changed parameter. Wait until the camera finishes re-configuring before trying to
move away from the current web page or powering off the camera.
Erase and Format
The SD card will be completely erased and formatted if the
Erase
button is used. The user will be
asked to confirm that this is the intention before the SD card memory card is actually erased.
