VISTEON VNMC-1000, Руководство пользователя

Страница: 7 / 59

Cautions
- 7 -
„
Safety Instructions
• Do not use when the product contains a defect or malfunction.
Do not operate the product while it is in abnormal conditions. When any
foreign material is inserted or a smoke or strange smell is continuously
detected, stop using the product and contact with
a purchase site or customer
support center. It may cause an accident, fire, or electric shock.
•
This product uses 12V DC vehicle power supply.
This product operates on 12V vehicle power supply. Be sure to use the cable
enclosed with the product. Or it may cause a product failure or serious
malfunction of the vehicle.
•
Be cautioned not to damage any vehicle parts during installation.
Be careful not to damage any vehicle parts (electric devices, wiring, pipes,
screws, etc.) while installing the product. When the product is abnormally
installed, it may cause an abnormal control of vehicle, fire, electric shock, or
traffic accident by damage of vehicle parts.
•
Never arbitrarily disassemble or modify the product.
Do not arbitrarily disassemble or modify the product. It may cause a fire,
electric shock, or product damage. If a product failure was caused by a user’s
fault, the user cannot get after-sales services.
•
Set the volume at an adequate level while using the product.
When the product is used in a large volume, a traffic accident may happen
because the driver cannot hear sound from outside. Adjust the volume level
of the product for right use.
•
Use genuine parts only.
Use genuine parts only. Or it may cause product damage, misinstallation, or
malfunction. In this case, the user assumes all responsibility for errors. When
any parts are lost or damaged, contact with
a purchase site or customer
support center.
•
Preserve the product from humidity or by direct contact with liquid,
and do not block the ventilation hole.
When any humidity or liquid substance is inserted inside the product, it may
cause a product failure or fire. Do not block the ventilation hole. If it is
blocked, a product failure or fire may happen due to accumulated heat.
•
Do not cut or modify the provided cable.
Do not cut or modify the provided cable. The power cord has its own fuse for
preventing overcurrent. If the user uses the cord without the fuse, the
protection circuit does not work and it may cause a product failure or fire.
•
Never manipulate or watch the product while driving.
Do not manipulate or watch the product while driving. It may cause a traffic
accident by careless driving. Be sure to park or stop the car in a safe area to
manipulate or watch the product.
„
Cautions before Use
• Install the product correctly for use.
Before using the product, correctly install the product after reading the system
connection section in this user guide.
•
Use the product after starting the engine.
When the user uses the product for a long time while not starting the engine,
the battery may be discharged.
•
Configure all settings for use before driving.
If the driver manipulates or changes the settings while driving, driving can be
interrupted. When the user especially uses the navigation function, start
driving after finishing the configuration for path setting, search, and the like.
If any configuration change is needed while driving, park the car in a safe
place, change to the desired settings, and drive the car again.
•
Use the exclusive navigation GPS antenna.
For the navigation GPS antenna to be connected to the product, use the
exclusive antenna only. Place the navigation antenna over 30cm away from
the body.
When the antenna is installed outside the car, its cable may be damaged,
disconnected, or stolen.