VISTEON AUXILIARY IDLE Скачать руководство пользователя страница 8

Page  7

 

Section 3.2   AUTOMATIC OPERATION - RPM CONTROL

Note that Automatic or "Power-up" operation can function only in vehicles equipped with Automatic Transmissions.

With Automatic RPM Control programmed, the engine speed will be elevated to Memory #1 within a few seconds
after the vehicle's enabling conditions are met.

Step 1  Program the module for Automatic RPM Control.

1. Go to main programming mode, press and hold [RPM CONTROL], [CHARGE PROTECT] & [FORD]

keys

2. In Menu 1, change the mode from "Base" to "

A Sr

" with ARROW key (press twice).

3. Save by pressing the [FORD] key until programming mode is exited.

Step 2  Activate Automatic RPM Control Mode.

With Automatic RPM Control programmed, the engine speed will be elevated to Memory #1 within a few seconds
after the vehicle's enabling conditions are met.  It is not required to press any additional keys on the module for
activation.

To deactivate Automatic RPM Control

ANY ONE of the following will exit Automatic Charge Protection and return engine to normal idle.

• 

• 

Press [FORD]  key

 

/B

• 

Press [RPM CONTROL] key

• 

Press [POWER]  key *

• 

Press brake pedal, take vehicle out of park, or release parking brake*

If toggled again, the vehicle will re-enter Automatic RPM Control mode.  The others require a key

off/restart cycle to restore Automatic or "Power Up" functionality.  Keep in mind that RPM Control can be
activated at any time by pressing the [RPM CONTROL] key followed by the [FORD] key.

To cancel Automatic Charge Protection completely

, you will need to re-program the APCM.  (Step 1)

Section 3.3   REMOTE USAGE - RPM CONTROL

For this module, an input is available to allow remote activation and deactivation of RPM Control. 
The remote switch will function the 

same

 as the [FORD] key on the module.

No programming is required

 for Remote RPM Control, however 

installation of a remote switch is required

Follow the instructions in Section 6 for the proper installation of the remote switch.

The Remote Ford switch works nicely with the Custom RPM Control feature discussed in the next section.  This
allows complete control of the idle speed from a remote location on the vehicle.

RPM

CONTROL

Содержание AUXILIARY IDLE


























Отзывы: