VistaQuest VQ8224, Руководство пользователя

Страница: 8 / 13

5. Using the camera
5.1 Installing the batteries
1. Open the battery door.
2. Insert 2 AAA alkaline batteries into the camera.
3. Turn on the camera.
Press the POWER button to turn it on (press it again to turn off).
5.2 Inserting a memory card (not included)
This camera has built-in internal memory. This memory can be extended with a SD memory card (not
included).
Follow the instructions given below to insert the optional SD memory card into the camera.
1. Turn off the camera first.
2. Insert the SD card into the camera.
Note: There is only one right direction to insert the SD memory card into the slot. Do not force the card
into the slot, or else it may damage both the camera and the SD memory card.
Note: The SD memory card must be formatted before taking photographs. See the following sections for
more information.
5.3 Formatting the memory or SD card
1. Press Menu button
2. Select Setup setting by right key.
3. Press OK to confirm and select by up or down key.
4. Press OK to format the card or memory.
5.4 Setting the resolution
The camera can be set to different resolutions.
1. Press MENU to set proper resolution.
Resolution: VGA(640X480),1.3M(1280x960),3.1M (2048X1536),
5M (2560 x 1920), 8M (3264x2448)
2. Six different resolutions will be displayed. Select the desired resolution by using the
▲
or
▼
buttons
and then press the OK button to confirm the selection.
5.5 Taking photographs
1. Turn on the camera by pressing the ON/OFF button.
2. Press MODE to set the camera to photo mode (
).