VistaQuest Digital Video Camcorder, Руководство пользователя

Страница: 9 / 26

-
6
-
6. Taking Pictures
• Taking a Video
1. Turn on the DV by pressing the POWER button and then start screen appears.
2. The TFT screen will display (default ).
3. View the subject through the TFT screen.
4. Press the SHUTTER BUTTON to take a video; Press the SHUTTER BUTTON again to stop
recording.
Note: 1.Before recording, user can slide the FOCUS SWITH to adjust the areas of recording.
2. During recording, User can press the zoom in or zoom out button for zoom in/out.
3.User can press MENU BUTTON , and then press the ARROW button to adjust the
video size and white balance. The video resolution is VGA (640 X 480) and QVGA
(320 x240).
4.Be careful not to contact the microphone while recording.
5.The maximum length of an individual video clip depends on memory size. Use a
higher capacity SD card will record longer movie clip.
6.Video recording stops automatically when memory is full.
7.Flash Strobe will be deactivated at this mode.
• Taking a Photo
1.Press the mode button once and you will see the icon shows on the TFT screen.
2.View the objects through the TFT screen.
3.Press the shutter button to take the photo.
Note: 1.How to avoid the blurry shots? After pressing down shutter button, keep your hands
steady for about 2 seconds to get the best result.
2.Use ▲ to adjust the flash ; Use ◄ to capture three continuous photos or
take the photo in self-timer mode .
3.User can press the zoom in or zoom out button for zoom in/out.