www.vistacnc.com
- 9 -
www.vistacnc.com
- 9 -
iMach
III
P4-S Pendant Manual v. 4.0
Speed, and different Spindle speed Rate Overridden (SRO) or Spindle Speed can be set up in PlugIn
Configuration table.
Quick Selection is disabled when Spindle is on, program is running or axes are moving
.
3. Button Jog and Function Buttons
3.1 Button Jogging
Double clicking and holding (press, release, and press, within half a second) a Button Jogging button
to start jogging. Slow Jog Rate is used in jogging.
When X axis is selected, X,Y Jog button
will move X axis,
When Y axis is selected, X,Y Jog button
will move Y axis.
3.2 ZERO and F1 button
3.2.1 While pressing and holding F1 button, LCD displays the button function, and press the EN side
button
to zero the currently selected axis.
