www.vistacnc.com
- 4 -
www.vistacnc.com
- 4 -
iMach
III
P1A-S Pendant Manual v4.0.0
□
Selected axis name. It flashes at ½ second rate.
1.2 STEP SIZE selection
Turn mpg mode selection knob to STEP SIZE mode. Turn MPG few steps to cyclically select the
step size. Different step sizes can be set up in PlugIn Configuration table.
Any other step sizes can be directly set on Mach3 Screen.
1.3 Pendant Offline mode and Screen selection
Turn mode selection knob to Scr/Off
position.
1.3.1
When axis selection knob is at X, Y or Z position, the pendant is in Offline mode, and any
MPG signals are not sent to Mach3 application. Offline mode can be used to align the
MPG wheel to a specific number with no axis movement.
1.3.2 When axis selection knob is at F%, S% or C% position, turning MPG few steps at –
direction will open or close the TAB window, and turning MPG few steps at + direction will
cyclically select Mach3 Screen page. Different Screen page can be set up in PlugIn Configuration
table.
