Vista VPC5-700CME, Руководство по установке

Страница: 16 / 20

NR (2D-DNR)
This is used to remove noise from the image in low light conditions when
AGC is applied.
NR MODE (OFF, Y, C, Y/C)
Sets the 2D NR filter mode.
Y LEVEL (0~15)
Sets the Y filter (Luminance) strength.
C LEVEL (0~15)
Sets the C filter (Chrominance) strength.
CAMERA ID
Sets the camera ID to ON or OFF. A title of 26 characters per line can be
applied.
CHR1
Allows you to edit line 1
CHR2
Allows you to edit line 2
CLR
Inserts a space
POS
Allows you adjust the location of the camera ID title display.
SYNC
INT
–
Internal synchronization only, on both LV and Mains models.
Use the tactile switch to
navigate the cursor. Pushing
centrally on the tactile switch
will allow selection of that
character.
The arrows at the bottom
allow you to move the cursor
without changing the
character.