Vista VPC5-700CME, Руководство по установке

Страница: 13 / 20

WHITE BAL
ATW (Auto Trace White balance)
SPEED (0~255)
Adjusts the pull-in speed of ATW.
DELAY CNT (0~255)
Sets the time-based hysteresis of ATW.
ATW FRAME (X0.5/X1/X1.5/X2)
Sets the pull-in frame magnification.
ENVIROMENT (indoor/outdoor)
Preset for either indoor or outdoor applications of the ATW
PUSH
Wide range Auto White Balance mode (AWB)
USER1 & 2
Both USER 1 & 2 can be individually set up for specific applications. The gain
values for USER 1 are biased towards the camera being installed outdoors and
USER 2 setting are biased towards being installed internally.
B-GAIN (0~255)
R-GAIN (0~255)
ANTI CR
Colour rolling suppression ideal for internal use when fluorescent lighting is
present.
MANUAL
The B and R gain values for manual WB are set on this screen.
LEVEL (14~57)
PUSH LOCK
PUSH LOCK fixes the white balance and should only be used when there is no
change in the illumination level. If there are any changes in illumination this
must be reset by pushing the
‘enter’ button again to adjust to new illumination
level.
BACKLIGHT
OFF / BLC / HLC
BLC
– Reduces over illumination of back lit subject
HLC
– Inverts over bright white light to black (Peak White Inversion)