32
• OSD DISPLAY SETUP
Use the
Joystick
to move the cursor, right to select sub menu (if applicable) and
(Tele/Wide)
to
adjust. To save changes highlight ‘SAVE AND EXIT’ and move
Joystick
right.
Joystick
left exits
without saving.
OSD DISPLAY SETUP
LANQUAGE : ENGLISH
TITLE : DOMEID
DOME OSD : ON
FOCUS/EXPOSURE : OFF
COLOR : YELLOW
SAVE AND EXIT(ESC TO CANCEL)
LANGUAGE
Select the desired language.
TITLE
up to 6 characters
DOME OSD
ON, POSITION, ON(ZOOM), ZOOM, OFF
All displays or titling will disappear when DOME OSD DISPLAY is set to OFF.
FOCUS/EXPOSURE
ON, OFF
ON: FOCUS and EXPOSURE displays. (AF AE)
COLOR
YELLOW, GRAY, BLUE
• SYSTEM SETUP
Use the
Joystick
to move the cursor, right to select sub menu (if applicable) and
(Tele/Wide)
to
adjust. To save changes highlight ‘SAVE AND EXIT’ and move
Joystick
right.
Joystick
left exits
without saving.
SYSTEM SETUP
MOTOR SETUP
PASSWORD EDIT
ORIGIN CHECK
CALIBRATION : ON
PASSWORD ENABLE : OFF
MENU TIMEOUT : OFF
DOME ANSWER : OFF
PRESET FOCUS : AUTO
SAVE AND EXIT(ESC TO CANCEL)
CALIBRATION
ON (Auto origin check), OFF
PASSWORD ENABLE
ON (requires the password to enter menu), OFF
MENU TIMEOUT
ON (5 minutes), OFF (menu always on)
DOME ANSWER
ON, OFF (no acknowledge command from the dome)
This option should be left OFF unless the keyboard/DVR/controlling device and/or Protocol
specifically ask for it to be switched ON.
PRESET FOCUS
AUTO, MANUAL, ONE PUSH
This option set the default mode of the focus when you save the Preset.
