57
VK2-600PTZ User manual
4. Select
‗END ANGLE‘. Press the
(IO/FN)
key, then
‗CTRL‘ is displayed. Move to the desired
position. Press the
(IC/FF)
key then
‗CTRL‘ disappears. To adjust at the 0.1 degree interval,
twist the
Joystick
at the pan field and the tilt field.
5. Select
‗SWAP‘. Set to ON, to swap the start angle and the end angle - adjust adjust with
(TELE/WIDE)
6.
To save changes highlight ‗SAVE AND EXIT‘ and move
Joystick
right.
Joystick
left exits
without saving.
4.9 Privacy Zone
There are 4no Privacy Zones available.
PRIVACY ZONE SETUP
(CTRL KEY)
NO TITLE METHOD
01 ABC ON BLOCK
02 DEF ON BLOCK
03 OFF ----
04 OFF ----
SAVE AND EXIT(ESC TO CANCEL)
NUMBER
: 01-04
TITLE
: up to 12 characters.
METHOD
: Block
Follow steps below to program the Privacy Zone:
1.
Select ‗TITLE‘ – this can be changed one of two ways:
Moving the Joystick left and right to select the cursor location and
(TELE/WIDE)
to
change the character
Use the Joystick to move and navigate the cursor to the alpha numeric character
table displayed and select the required character with the
(IO/FN)
keys.
2. Select the Privacy Zone you wish to set using the
Joystick
to highlight location. Press the
(IO/FN)
key
, ‗CTRL‘ is displayed and Privacy Area Menu displays. Move to the desired position.
Press the
(IC/FF)
key then
‗CTRL‘ disappears and returns to the previous menu.
NOTE:
The Privacy Zone is set up to the actual screen size and
NOT
the Privacy Area ‗targeting‘
display on the screen.
PRIVACY AREA MENU
(CTRL KEY)
CONTROL
NUMBER 001
354.8 344.8
3. To select between on or off
- adjust with
(TELE/WIDE)
4.
To save changes highlight ‗SAVE AND EXIT‘ and move
Joystick
right.
Joystick
left exits
without saving.
Содержание VK2-600PTZ
