Vista VBC28V12DN960H, Руководство по установке, Страница: 17 / 23

16
Top: 0
– 288 (increments of 1) 0=top, 288=bottom
Bottom: 0
– 288 (increments of 1) 0=top, 288=bottom
Left: 0
– 468 (increments of 1) 0=left, 468=right
Right: 0
– 468 (increments of 1) 0=left, 468=right
Colour:
1
– 8
(Choose from the following colours for the privacy zones - red, green, blue,
lime, cyan, magenta, white, black)
Transp:
0.00, 0.50, 0.75, 1.00
(Sets the transparency of the privacy zone area)
Mosaic:
Off, On
(when mosaic is set to On, all programmed privacy zones switch to a non
adjustable mosaic/tile distortion effect. For full mosaic, Transp needs to be set
to 0.00)
DAY / NIGHT
Day / Night: make changes to the camera operation
Modes:
Colour, B/W
(please note that the camera switches modes via the Photocell. If you wish to
change Burst or IR Optimizer settings then you will need to cover the photocell
to put the camera into B/W mode).
Colour:
Colour operation
B/W: Monochrome only operation
Burst: Off, On
(Allows the colour burst signal in monochrome to be removed if required)
IR Optimizer: Off, On
Mode: Auto, Centre
Level: 0
– 31 (increments of 1)
NR (2DNR)
Digital noise reduction is used to remove
‘noise’ from the image in low light
conditions when AGC is applied.
NR mode : Off, Y, C, Y/C (Sets the 2D NR filter mode)
Y Level: 0
– 15 (increments of 1) Sets the Y filter (Luminance) strength.
C Level: 0
– 15 (increments of 1) Sets the C filter (Chrominance) strength.