Vista VBC28V12DN960H, Руководство по установке, Страница: 15 / 23

14
ATW (Auto Trace White balance)
Speed:
0 to 255 (increments of 1)
(Adjusts the pull in speed of ATW)
Delay Cnt:
0 to 255 (increments of 1)
(Sets the time-based hysteresis of ATW)
ATW Frame: x0.5, x1, x1.5, x2
(Sets the pull in frame magnification)
Environment: Indoor, Outdoor
(Preset for either indoor or outdoor applications of the ATW)
Push: Sets the mean of the Auto White Balance (AWB) of the area viewed
User 1 & 2: Both User1 & 2 can be individually set up for specific applications.
B-Gain: 0 to 255 (increments of 1)
R-Gain: 0 to 255 (increments of 1)
Anti CR: When shut+auto iris mode used, this setting can reduce, but may not
eliminate colour roll caused by fluorescent lighting.
Manual:
A single scale, simultaneous adjustment of the B and R gain values
Level: 24 to 97 (increments of 1)
(The lower the number, the higher content of Red, the higher the number the
higher content of Blue in the image)
Pushlock: Sets the white balance based on the lighting level at the camera at
that time (Best used when there is no change in the illumination level)
BACKLIGHT
Modes: Off, BLC, HLC.
BLC: Globally applies non adjustable BLC (Back Light Compensation) to the
image
HLC: Globally applies non adjustable HLC (High Light Compensation
– Peak
White Inversion) to the image
PICT ADJUST
Mirror: Off, on (horizontally inverts image).
Brightness: 0
– 255 (increments of 1)
Contrast: 0
– 255 (increments of 1)
Sharpness: 0
– 255 (increments of 1)
Hue: 0
– 255 (increments of 1)
Gain: 0
– 255 (increments of 1)