Vista smartdisc 10IPRT VLS2-10IPRT, Быстрое руководство по установке

Страница: 14 / 22

Quick Installation Guide Vista
8 SmartDisc 10IP
RT
1.5 HYBRID Card 4
On the basic device SmartDisc 10IP
RT
, the BNC sockets for analogue cameras are not activated. To use
them, you require the HYBRID Card 4 (VLS-HC/IP), which is available separately.
A SmartDisc 10IP
RT
supports a maximum of two such expansion cards, which together make it possible to
operate a total of eight analogue cameras. A single HYBRID Card 4 makes it possible to operate up to four
analogue cameras. The number of analogue inputs used reduces the number of IP cameras possible on the
SmartDisc 10IPRT.
Installing and mounting the HYBRID Card 4
When installing the SmartDisc 10IP
RT
, always follow the installation instructions that come with the card.
The individual installation stages, including a function test, are described in these instructions.
Programming the HYBRID Card 4
To adjust the settings on the HYBRID Card 4, open the dialogue window Recorder settings/ HYBRID Card 4
using your SmartControl or SmartControl PRO software (minimum requirement: Version 4.11 in each case.
Installed HYBRID Card 4
The graphic shows the recorder settings for a SmartDisc 10IP
RT
with an installed HYBRID Card 4. For the
individual camera channels for the expansion card, the DSP information is displayed (e.g. BF547 / 01.02 /
00.02 / 01.15).
The Enabled option allows you to take the relevant analogue video inputs into operation.
Note: Please note that an enabled analogue video input always has priority over an IP camera that has
been configured for the same channel.