Vista Optio OPNVR Series, Руководство пользователя

Страница: 107 / 139

Type Note
Connect camera
to the PoE After connect the camera to the PoE, NVR allocate an IP address in the specified
IP segment to the camera. NVR tries to use
arp ping to set. If the NVR has
enabled the DHCP function, it uses DHCP to set.
 After successfully set IP address, NVR can send out broadcast via the
switch and get the corresponding response. Now The camera has
registered to the NVR. Go to the preview interface, the corresponding
channel has been used and there is a small PoE icon at the top left corner.
 Go to the Register interface to view the connected device list, you can see
the PoE channel number, PoE port information and etc. Click IP search to
display or refresh the information.
Remove camera
from the PoE
port After remove the camera network cable from the PoE port, the channel displays
“Cannot find the network host”. On the registration interface, the IP address is
shown as offline.
The mapping
policy when
connect a
camera to the
PoE port.
The PoE port and the channel window is one to one correspondence. For
example, connect a network camera to PoE port 1, it register to channel 1 by
default.
Network Test
Main menu->Info->Network->Test