3
PRECAUTIONS
Safety-----------------------------------------
Should any liquid or solid object fall into the MiniD400,
unplug the unit and have it checked by a qualified
person before operating again.
Unplug the unit from the wall outlet if it is not going to be
used for several days. To disconnect the cord, pull
it out by the plug, never by the cord itself.
Allow adequate air circulation to prevent internal heat
build-up. Do not place the unit on surfaces (rugs,
blankets, etc.)
The height and linearity controls located at the rear
panel are for adjustments by qualifies personnel only.
Installation----------------------------------------
Do not install the unit in extremely hot or humid
environments or places exposed to excessive dust or
mechanical vibrations.
Cleaning-------------------------------------------
Clean the unit with a slightly damp soft cloth. Use a
mild household detergent. Never use strong solvents
such as thinner or benzene as they might damage the
finish of the unit.
Intelligent Security & Fire
