E34L
ECC832
ECC832
E34L
V1
model i34
V3
V6
E34L
V2
V5
V4
E34L
Figure 1:
model i34
tube layout
Never use excessive force when inserting the tubes into their socket.
Controls and Their Functions
Front Panel
Selector Switch
–
The three position selector switch can be u
sed to select the active audio source.
Volume control
-
This control is used to adjust the output volume level. Turning the control knob clockwise
increases the sound level and turning it counterclockwise decreases the sound level.
Back Panel
Power Switch
:
Press the power switch to (I) turn the power on. Within 10-20 seconds, as the heaters
reach operating temperature the tubes will begin to glow a soft orange light. Press the power switch to (0)
to turn the unit off. As the heaters cool off, the orange glow will slowly disappear.
It is normal for a vacuum tube equipment to run warm if used for prolonged periods. Tubes are
operating at much higher temperature and should not be touched for at least ten minutes after the unit
is turned off to prevent burns. Always place your amplifier away from children and pets to prevent
burns.
Audio signal connection jacks
-
Use these jacks to connect the audio interconnects from your source
components to the amplifier.
Speaker terminals -
Your amplifier has two output channels, the Right Output and the Left
Output. Each output channel is designed to handle one speaker. Follow the instructions outlined in the
Operating Procedure for the correct speaker connections.
6
