VL-NVR 4/8/16CH Quick Guide V1.1
VL-NVR 4/8/16CH Quick Guide V1.1
Before You Begin
Read these instructions before installing or operating this product.
Note:
This installation should be made by a qualified service person and should conform to local codes.
This manual provides installation and operation information. To use this document, you must have the following minimum
qualifications:
•
A basic knowledge of CCTV systems and components
•
A basic knowledge of electrical wiring and low-voltage electrical connections
Intended use
Only use this product for its designated purpose; refer to the product specification and user documentation.
Customer Support
For assistance in installing, operating, maintaining and troubleshooting this product refer to this document and any other
documentation provided. If you still have questions, please contact Norbain Technical Support and Sales:
Norbain SD, Inspired, Easthampstead Road, Bracknell , Berkshire RG12 1YQ.
UK +44 (0) 118 912 5000
Note:
You should be at the equipment and ready with details before calling Technical Support.
Conventions Used in this Manual
Boldface
or button icons highlight command entries. The following
WARNING,
CAUTION
and
Note
statements identify
potential hazards that can occur if the equipment is not handled properly:
*
WARNING:
Improper use of this equipment can cause severe bodily injury or equipment damage.
** Caution:
Improper use of this equipment can cause equipment damage.
Note:
Notes contain important information about a product or procedure.
Where applicable a Declaration of Conformity in accordance with the following EU directive has been made. The
manufacturer declares that the product supplied with this document is compliant with the provisions of the EMC
Directive 2014/30/EU, the CE Marking Directive 93/68 EEC and all associated amendments.
Our CE EU-Authorised Representative:
Comply Express Unipessoal LDA, StartUp Madeira - EV141, Campus da
Penteada, 9020-105 Funchal, Madeir
a, Portugal”
All lead-free products offered by the company comply with the requirements of the European law on the
Restriction of Hazardous Substances (RoHS) directive: 2011/65/EU, which means our manufacture processes
and products are strictly
“lead-free” and without the hazardous substances cited in the directive.
The crossed-out wheeled bin mark symbolizes that within the European Union the product must be collected
separately at the product end-of-life. This applies to your product and any peripherals marked with this symbol.
Do not dispose of these products as unsorted municipal waste.
“A UK Declaration of Conformity in accordance with GB UKCA standards has been made. The manufacturer
declares that the product supplied with this document is compliant with the provisions of the Electromagnetic
Compatibility Regulations 2016, and where applicable, the Electrical Equipment (Safety) Regulations 2016
Directives.”
