www.vissonic.cn
VISSONIC ELECTRONICS LIMITED
16
Step 1: Select "01" on main unit for
no.1 camera.
Step 2: Adjust the camera to shoot
the microphone.
Step 3: Press ON and press Off the
microphone
that
camera
are
shooting.
Step 4: Adjust the camera to shoot
the
next
microphone.
Step 5: Press ON and press Off the
microphone
that
camera
are
shooting.
Step 6: Repeat the step 2 to step 5
until you preset all position for the
camera '01'
Step 7: Select "02" on main unit for
no.2 camera
Step 8: Repeat the step 2~step 6 to
finish the camera "02". More camera
are set as the same way.
Step 9: After setting the last
microphone (on and off the
MIC),we can adjust the camera to
give a full view of the meeting and
press 'ESC' to quit from the menu of
'Start Set'. The preset of full view
will be active while there are no
microphone on.
Example
Here we have to set up two cameras, using the VISCA, SAMSUNG/PELCO-D or CUSTOM
protocol, and using a video switcher or camera tracking controller.
Step 1:
The lower control port of the CONTROL connected to the conference processor is
connected to the camera.
1.
Camera using the VISCA protocol.
2.
Camera using SAMSUNG/ PELCO-D