7.3 Wiring
Caution
1) Do not take code wire but plaug itself when take the plug off from power inlet.
Impared code may be able to occur electric leakage or fire.
2) Contact the authorized personnel if the wires are peeled off after turning off.
3) Contact the authorized personnel after turning off if wire becomes too hot.
4) Be careful wires are not bent by heavy materials.
Damages on wire may cause electric leakage or fire.
5) Clean the pins of plug regularly.
Much dusts on the pins may cause electric leakage or fire.
6) Connect cord accurately till pin is fitted into the socket throughly.
Damages on wire may cause electric leakage or fire.
7) Turn off power right now if smells or smokes, sparks or sounds.
8) Do not load much to the one power cord.
Overloading may cause heat and fire.
9) Use suitable rated socket.If not it may cause electric leakage or fire.
10) Be sure to install earth.
If not it may cause electric leakage or fire.
11) Please be sure to keep to use LAN port in the building inside only.
12) If the equipment is used in a manner not specified by the manufacturer,
the protection provided by the equipment may be impaired.
