* Rotation Limit : Edge as much as rotations if edging is not done
4) Regulate Bevel : Necessary compensation values for regulating beveling
-->
Bevel Height Constant
0.98
<--
Bevel Finish Position
0.00
Bevel Polish Position
0.00
CEL Frame SIZE (H/V)
0.00
CEL Frame SIZE (V)
0.00
Exit
* Bevel Height Constant : Grooving depth of bevel wheel
* Bevel Finish Position : Compensate finished beveling position
* Bevel Polish Position : Compensate finished polishing position
* CEL Frame SIZE (H/V) : Compensate whole size of celluloid frames
* CEL Frame SIZE (V) : Compensate vertical size of celluloid frames
5) Regulate Groove /Chamfer : Necessary compensation value for regulating
beveling/chamfering
* Minimum Lens Width for Groove :
* Groove Depth :
* Groove Position : Compensate position of grooving wheel
* Groove Width :
* Groove Compensation Parameter : Compensate depth
* Chamfer Depth :
* Chamfer Position <F>, <R> : Compensate front /rear position
***** Regulate Bevel *****
Minimum lens width for Groove
Groove Depth
Groove Position
Groove Width
Chamfer Depth
Chamfer Position
Chamfer Width
Exit
*****
Regulate Groove & Chamfer
*****
*****
*****
*****
<
<
<
<--
--
--
--
0.40
0.00
0.60
1.50
0.00
0.00
0.00
0.00
0.00
0.00
<
F >
< R >
<BVL, F>
<BVL, R>
<FLT, F>
<FLT, R>
