11
HOMEDEPOT.COM
Please contact
1-855-847-7264
for further assistance.
Troubleshooting
You can solve many common appliance problems easily, saving you the cost of a possible service call. Try the suggestions
below to see if you can solve the problem before calling for service.
PROBLEM
POSSIBLE CAUSE
¨
Temperature
control
is
set
too
cold.
¨
Turn
the
control
to
a
warmer
setting
and
allow
several
hours
for
the
temperature
to
stabilize.
¨
Not plugged in.
¨
The circuit breaker tripped or a blown fuse.
Appliance does not operate.
¨
Temperature control is set too warm.
¨
Turn the control to a cooler setting and allow several hours
for the temperature to stabilize.
¨
Door is kept open too long or is opened too frequently.
¨
Warm air enters the appliance every time the door is opened.
¨
Open the door less often.
¨
The door is not closed completely.
¨
The door gasket does not seal properly.
¨
The appliance has recently been disconnected for a period of
time.
¨
Four hours are required for the appliance to cool down
completely.
Temperature inside the appliance is too warm.
Temperature inside the appliance is too cold.
¨
Check to assure that the appliance is on a level surface.
¨
The appliance is touching the wall.
¨
Relevel the appliance and move it from the wall.
¨
If continued vibration occurs, turn off the appliance and unplug
the power plug.
¨
Contact Vissani’s Customer Service Department for further
assistance.
Vibrations.
Moisture forms on inside appliance walls.
¨
Door is slightly open.
¨
Door is kept open too long, or is opened too frequently.
¨
Open the door less often.
¨
The door is not sealed properly.
¨
Door
is
slightly
open,
causing
cold
air
from
inside
the
appliance
to
meet
warm
moist
air
from
outside.
Moisture forms on outside of appliance.
¨
The appliance is not on a level surface.
¨
The gasket is dirty.
The door will not close properly.
