3
Qubo 35 P/L
1/2019 (EN)
EN
1 Safety
1.1 Explanation of symbols
Safety instructions are marked as follows in these
instructions.
⚠
WARNING
A safety instruction marked in this manner indi-
cates a possible dangerous situation, which if not
prevented may result in death or severe injury.
⚠
NOTE
A safety instruction marked in this manner indi-
cates a possible dangerous situation, which if not
prevented may result in damage to property and
the environment.
1.2 Intended use
The product is used exclusively for incorporating mer
chandise supports for the presentation of goods.
Merchandise supports and electrical devices permitted
are exclusively those that conform to the specification
in these instructions.
Field of application
The product must be used exclusively in the commercial
field.
Personnel
These instructions describe the assembly of the product
as well as its handling and cleaning. Therefore these
instructions must be handed on to the end user after
successful assembly of the product.
The contents of the section on “Assembly” is directed at
personnel who undertake the assembly and the electrical
connection (e.g. shop fitters, licensed electricians).
The contents of the section on “Handling” is directed at
the end users (e.g. sales personnel, visual merchandisers).
⚠
WARNING
In the event of misuse, there is the danger that the
merchandise supports and the electrical devices
will be damaged. This may lead to injury and da-
mage to the product.
>
Use only approved accessories and electrical
devices.
>
Comply with the permitted connection, maxi-
mum load and equipment values.
>
Do not lean any ladders against the merchandi-
se supports.
1.3 Fundamental dangers
Overloading
⚠
WARNING
>
Do not load the merchandise supports above
the maximum load capacity.
>
Do not place any receptacles, from which fluids
can escape, on the merchandise supports.
>
Keep moisture away from current conducting
components.
2 Product description
2.1 Overview
The Qubo 35 P/L is a structural shelving system, with
a high degree of design freedom, for centre room and
wall structures.
Fig. 1: Qubo 35 P/L
2.2 Brief description
Qubo 35 P/L is a steel frame, with or without power
tracks for electrified shelves with LED lighting, with
a 175 mm hole matrix. This allows the use of shelves with
integrated light fittings for additional illumination of
the goods on display.
The structural system can be configured in many ways
by fitting connecting tubes.
2.3 Power supply
The 24 V distributor enables power supply to a maximum
of 8 connections, each with a maximum of 2 converters of
75 W. The switched input enables the use of a switch.
NV (24 V)
L = 500 mm
100–240 V
L = 200 mm
ø 7.7 mm
Fig. 2: Converter
NOTE! It is imperative to take account of power
consumption of the electrical devices.
The dimmer set 318-271.19 is required for the use of
dimmers.
For an overview of the electrical connection of the frames
and the associated components see the section on Elect
rification 3.11.
