10
Qubo 35 P/L
1/2019 (EN)
EN
4 Operation
⚠
WARNING
Injury can be caused and the merchandise supports
and/or system can be damaged if the maximum
load of the merchandise supports is exceeded.
>
Observe the maximum load values of the indivi-
dual merchandise supports.
>
Do not exceed the maximum load of 450 kg
per frame.
4.1 Cleaning
During the course of time, dust and deposits from
clothes hangers can settle on the merchandise supports.
To prevent the goods on display from becoming soiled,
the merchandise supports must be regularly cleaned.
Remove goods from the merchandise support.
1. Remove dirt on the merchandise support carefully
with a soft, dry cloth.
2. Remove stubborn dirt with a mild cleaning agent.
5 Dismantling and disposal
5.1 Dismantling
>
Pull out the plug from the electric socket.
>
Dismantle converters and power distributors
(where present).
5.2 Disposal
⚠
NOTE
If product components are improperly disposed
of they can pose a danger to the environment.
>
Ensure product components are disposed of
in a proper environmental manner or through
waste management specialists.
>
Send components that can be recycled for
recycling.
• Send metal components for recycling or scrapping.
• Send plastics for recycling.
• Have electrical and electronic components disposed
of by an approved waste management specialist.
• Dispose of remaining components sorted according
to the type of material.
6 Technical data
6.1 Dimensions
Converter dimensions, dependent on power output
L = 500
180
30
60
L = 200
Fig. 13: Converter dimensions
6.2 Connection values
General
Specification
Value Unit
Operating voltage
100–240 V
Frequency
50 – 60 Hz
Nominal voltage (SELV)
24 V
Maximum load
9.5
225
A
W
Mains protection class; converter
10 – 150 W
II
Maximum casing temperature
(converter)
90 °
6.3 Load values
The maximum load applies including the dead weight
and the weight of all components
Frame
Specification
Load
Maximum load
450 kg
Shelf
Specification
Load
Maximum load
40 kg
