Visonic AmberLink, Руководство пользователя

Страница: 26 / 30

D-303166 AmberLink™ User Guide 25
Customer Information
The required customer information is provided in the User Guide (manual).
1.
This equipment, wireless emergency response system, model “AmberLink”, complies with
Part 68 of the FCC Rules and the requirements adopted by the ACTA. On the bottom
panel of this equipment is a label, that contains among other information, a product
identifier in the format US:VSOAL00BAMBERNA. If requested, this number must be
provided to the telephone company.
2.
This equipment is designed to be connected to the telephone network using RJ11
connector which complies with Part 68 rules and requirements adopted by ACTA and
properly installed RJ31X connector. See Installation Instructions for details.
3.
If the “AmberLink” causes harm to the telephone network, the telephone company will
notify you in advance that temporary discontinuance of service may be required. If
advance notice is not practical, you will be notified as soon as possible. Also, you will be
advised of your right to file a compliant with the FCC if it is necessary.
4.
The telephone company may make changes in its facilities, equipment, operations or
procedures that could affect the operation of the equipment. If this happens, the telephone
company will provide advance notice in order for you to make necessary modifications to
maintain uninterrupted service.
5.
If the equipment is causing harm to the telephone network, the telephone company may
request to disconnect the equipment until the problem is resolved.
6.
The “AmberLink” installation is described in the User Guide. Connection to telephone
company provided coin service is prohibited. Connection to party lines service is subject to
state tariffs.
7.
Wireless emergency response system must be able to seize the telephone line and place
a call in an emergency situation. It must be able to do this even if other equipment
(telephone, answering system, computer modem, etc.) already has the telephone line in
use. To do so, “AmberLink” must be connected to a properly installed RJ31X jack that is
electrically in series with and ahead of all other equipment attached to the same telephone
line. Proper installation is depicted in Appendix E. If you have any questions concerning
these instructions, you should consult your telephone company or a qualified installer
about installing the RJ31X jack and “AmberLink” for you.