DE6271U
3
The following table shows the possible combinations:
F1
100
+
MODE
F3
1
+
MODE
F2
10
+
F1
100
MODE
F2
10
F2
10
+
MODE
F3
1
+
F2
10
F3
1
+
F1
100
F1
100
F3
1
A sample password:
F2
10
,
MODE
+
F1
100
,
F2
10
,
F2
10
+
F3
1
To select the CHANGE PASSWORD mode:
•
Press the “MODE” button and enter the installer password, or
present the master key to the reader until the “ADD” LED starts
blinking.
•
Press the “MODE” button twice until the “SPECIAL” LED lights
(if the master key is used, enter the current 4 level password
and verify that the display shows “Er”, then press the “MODE”
button a few times until the display shows “PP”).
•
Enter in the new password, as a combination of 4 button presses.
•
Present the master key until the green and yellow LEDs light to
confirm acceptance of the password.
•
Press “MODE” for the next programming modes or simply wait
5 seconds for the system to time out and revert to normal
operation.
3
33
3. NORMAL OPERATION
. NORMAL OPERATION
. NORMAL OPERATION
. NORMAL OPERATION
3.1 Valid Key Detection
If a key is presented to the external reader
,
the AXS-10 PRO will
search the list of valid keys in its memory. If the key is found, the
AXS-10 PRO will light the green LED and activate the output
relay to unlock the door for the pre-programmed unlock duration.
3.2 Invalid Key Detection
If the key presented to the reader is not found in the AXS-10 PRO
memory, the red LED will light for two seconds and the lock will
not open.
3.3 Internal Request To Exit
The AXS-10 PRO has a request-to-exit feature. To use it connect a
proper Normally Open switch or PIR detector to the Request-to-exit
terminal in the AXS-10 PRO. Each time the button is pressed or
the PIR detects, the relay output of the AXS-10 PRO will be
activated for the pre-programmed unlock duration.
WARRANTY
WARRANTY
WARRANTY
WARRANTY
Visonic Networks Ltd. and/or its subsidiaries and its affiliates ("the Manufacturer") warrants its
products hereinafter referred to as "the Product" or "Products" to be in conformance with its
own plans and specifications and to be free of defects in materials and workmanship under
normal use and service for a period of twelve months from the date of shipment by the
Manufacturer. The Manufacturer's obligations shall be limited within the warranty period, at its
option, to repair or replace the product or any part thereof. The Manufacturer shall not be
responsible for dismantling and/or reinstallation charges. To exercise the warranty the product
must be returned to the Manufacturer freight prepaid and insured.
This warranty does not apply in the following cases:
improper installation, misuse,
failure to follow installation and operating instructions, alteration, abuse, accident or
tampering, and repair by anyone other than the Manufacturer.
This warranty is exclusive and expressly in lieu of all other warranties, obligations or
liabilities, whether written, oral, express or implied, including any warranty of
merchantability or fitness for a particular purpose, or otherwise. In no case shall the
Manufacturer be liable to anyone for any consequential or incidental damages for breach
of this warranty or any other warranties whatsoever, as aforesaid.
This warranty shall not be modified, varied or extended, and the Manufacturer does not
authorize any person to act on its behalf in the modification, variation or extension of this
warranty. This warranty shall apply to the Product only. All products, accessories or
attachments of others used in conjunction with the Product, including batteries, shall be
covered solely by their own warranty, if any. The Manufacturer shall not be liable for any
damage or loss whatsoever, whether directly, indirectly, incidentally, consequentially or
otherwise, caused by the malfunction of the Product due to products, accessories, or
attachments of others, including batteries, used in conjunction with the Products.
The Manufacturer does not represent that its Product may not be compromised and/or
circumvented, or that the Product will prevent any death, personal and/or bodily injury
and/or damage to property resulting from burglary, robbery, fire or otherwise, or that the
Product will in all cases provide adequate warning or protection. User understands that a
properly installed and maintained alarm may only reduce the risk of events such as
burglary, robbery, and fire without warning, but it is not insurance or a guarantee that
such will not occur or that there will be no death, personal damage and/or damage to
property as a result.
The Manufacturer shall have no liability for any death, personal and/or bodily injury
and/or damage to property or other loss whether direct, indirect, incidental,
consequential or otherwise, based on a claim that the Product failed to function.
However, if the Manufacturer is held liable, whether directly or indirectly, for any loss or
damage arising under this limited warranty or otherwise, regardless of cause or origin, the
Manufacturer's maximum liability shall not in any case exceed the purchase price of the
Product, which shall be fixed as liquidated damages and not as a penalty, and shall be
the complete and exclusive remedy against the Manufacturer.
Warning:
The user should follow the installation and operation instructions and among
other things test the Product and the whole system at least once a week. For various
reasons, including, but not limited to, changes in environmental conditions, electric or
electronic disruptions and tampering, the Product may not perform as expected. The user
is advised to take all necessary precautions for his /her safety and the protection of
his/her property.
6/91
This device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio and
television reception. However, there is no guarantee that interference will not occur in a particular installation. If this device does cause such
interference, which can be verified by turning the device off and on, the user is encouraged to eliminate the interference by one or more of the
following measures:
– Re-orient or re-locate the receiving antenna.
– Increase the distance between the device and the receiver.
– Connect the device to an outlet on a circuit different from the one which supplies power to the receiver.
– Consult the dealer or an experienced radio/TV technician.
TECHNICAL DEPT.:
39 HAMELACHA ST. CARMIEL 20100 ISRAEL TEL: 972 4 9081115 FAX: 972 4 9081116
Tech. Support email:
VISONIC INC. (U.S.A.):
10 NORTHWOOD DRIVE, BLOOMFIELD CT. 06002-1911. TEL: (860) 243-0833, (800) 223-0020 FAX: (860) 242-8094
VISACCESS LTD. (UK):
UNIT 1, STRATTON PARK, DUNTON LANE, BIGGLESWADE, BEDS. SG18 8QS. TEL: (01767)600857 FAX: (01767)601098
INTERNET:
www.visonicnet.com
Visonic Networks Ltd. 2002 AXS-10 PRO DE6271U (REV. 0, 5/2002)
