Static scanner OCD6000-F62-...
Commissioning
D
at
e of
ed
iti
on:
20
03
/0
7/
30
16
Subject to reasonable modifications due to technical advances.
Copyright Fuchs, Printed in Germany
Fuchs Group • Tel.: G49 621 776-0 • USA +1 330 4253555 • Sin65 67799091 • Internet http://www.pepperl-fuchs.com
6.3
Position of the reflector relative to the sensor
Figure 6.2: Alignment of the reflector
The middle of the reflector must be aligned to the middle of the transmitter aperture
(applies vertically and horizontally).
6.4
Alignment to foil reflectors (material F6000)
The reflector must be correctly oriented to achieve maximum detection ranges. The
orientation can be determined using hexagonal honeycomb grids for reflector foil
F6000. If the reflector foil piece is applied correctly, the identifying symbols, which can
be seen in the following illustration, show the relative orientation to the sensor.
Side view
Reflector
Receiver
Emitter
Plug connector
Top view
Reflector
Emitter
Plug connector
