12
▪
Blue wire to neutral
▪
Brown wire to live
11.4.
Connect USB
The BaseSpion is connected
to the computer using a USB
connector type A to B. A 2-
meter USB cable is included
with the BaseSpion,
however any USB cable
supporting USB2.0 can be
used.
The USB provides
communication and power
to the BaseSpion’s main
board processor. But to run
power analyzer and
spectrometer, you need to have power connected.
Start the “Viso Light Inspector” software after having connected the USB; the
connection to the BaseSpion will be established automatically. A successful
connection is s
hown with a green “Connected” icon in the upper right
-hand corner
of the ‘Viso Light Inspector’ software.
You can connect and disconnect the USB without restarting the “Viso Light
Inspector” software, as the connection is always established
automatically as soon as
the USB connector is plugged in and vice versa.
Neutral
Ground/Earth
Live
