UltraDecoder Operators Manual
Quick Start Guide
Issue : 3 (23/12/2015)
5
Ref : ULTD-ASUM-7001
Copyright © Vislink plc
IP
V
IDEO
T
AB
3.3.
Output Configuration
•
In the Decoder tab, as shown below, select the desired program number from the dropdown
list if the incoming ASI stream contains more than one program.
•
Select the output video format. The decoder will automatically recognise the format of the
incoming ASI stream and will up-scale or down-scale to the selected format. Note that it is
important to select the same frame rate as the incoming ASI stream as this cannot be
changed by the decoder.
•
If not already selected, change the Play control to Play.
