RCD9 Receiver Operators Manual
Control Menus and Receiver Operation
Issue No: 1
Page: 20
Ref: RCD9-ASUM-7001
Copyright © 2017 IMT Ltd, trading as Vislink
Setup Menus
Figure 6-6
Setup Menus
To access the setup menus press the ESC button several times to reach the Overview
screen and then press the OK button. Use the
▲▼
keys to reach the required setup
function and press the OK button.
NOTE: The functions displayed in the setup menus are dependent on whether “Advanced
mode” is set to Enabled or Disabled in the General settings menu. The Advanced
mode provides additional features and is password protected. – see Section 6.7.6.5.
6.7.1.
Channel Frequency Menu
Channel
Figure 6-7
Channel Screen
This menu is used to select one of the sixteen channels or the manual frequency (if it has
been enabled). The manual frequency is configured as described in Section 6.7.1.2.
Preset Config.
This menu displays information about the presets that have been programmed in the
receiver.
Channel Config
Displays the frequencies assigned for the sixteen preset and manual channels.
The Manual channel allows the frequency to be set in 1MHz steps anywhere within the RX
operating band. The OK button allows the
◄►
buttons to select the required digit, the
▲▼
buttons then select the required value. The OK button then stores the value.
NOTE: In Advanced mode the frequencies of the preset channels may be re-assigned. See
Section 6.7.6.5.
