![Vislink RCD9 Скачать руководство пользователя страница 20](http://html.mh-extra.com/html/vislink/rcd9/rcd9_user-manual_1032747020.webp)
RCD9 Receiver Operators Manual
MVL-HD3 Diversity Control Unit
Issue No: 1
Page: 14
Ref: RCD9-ASUM-7001
Copyright © 2017 IMT Ltd, trading as Vislink
4.3.7.
USB Port
This port may be used to allow software in the Receiver control unit to be updated. Please
see Section 6.7.6.6.
4.3.8.
Ethernet Remote (rear panel connector)
Connector type:
RJ11
The Ethernet port on the connector panel may be used for remote control and monitoring
of the receiver.
4.3.9.
HDMI
Connector type:
Type C HDMI 1.3a
4.3.10.
TSoIP
Connector type:
RJ11
The TSoIP Ethernet port allows easy transportation of encapsulated ASI over an IP Ethernet
networking system.
4.3.11.
Option (front panel connector)
Connector type:
LEMO 7way EGG.1B.307.CLL
This connector is available for future application.
4.3.12.
Data (front panel connector)
Connector type:
LEMO connector EGG.1B.307.CLL
Allows ‘User Data’ RS 232 or R485 to be output from the ASI Transport stream.
Pin
Function
Direction
1
0v
NC
2
User Data Tx -n RS232
Out from Unit
3
User Data Rx –n RS232
Into Unit
4
User TX p RS485
NC
5
User TX n RS485
NC
6
User RX_p RS485
NC
7
User RX_n RS485
NC
Table 4-5
Data Pinouts
4.3.13.
Triax
Connector type:
LEMO connector FFA.2S.675.CTA C87Z
Two or four triaxial connectors carry DC power, 60MHz/80MHz IF and serial control /
status data between the Diversity Unit and Head units.