Vislink HDT-1000S2, Руководство пользователя и техническое руководство

Страница: 8 / 18

1-6 HDT-1000S2 User and Technical
Rev 1
5 Setting Up the HDT-1000S2
You can select presets from the membrane switch control. You can modify preset parameters
using a PC with either the Microsoft
®
Windows XP
®
or Microsoft
®
Windows Vista
®
operating
systems. You can configure up to 16 individual preset configurations as follows:
• Select from 16 factory or custom preset configurations
• Configure and save up to 16 custom preset configurations
• Load custom preset configurations from a file on your PC into your HDT-1000S2.
• Apply an encryption key to the presets simultaneously or individually.
The figure to the right and
associated table shows the
membrane switch control
where you select a preset,
low or high radio frequency,
and audio selections.
The switch control contains a
“dark” timer that turns off
LEDs after a delay. All LEDs
are active for 0.5 seconds
after the unit is powered up.
Up Arrow
Key
AUDIO
LEDs
PRESET
LEDs
VID
LED
ALARM
LED
RF HI
LED
Down
Arrow Key
Multi-LED
display
SAVE Key
PRESET
Key
RF HI/LOW
Key
AUDIO 1
MIC/LINE
Key
CRYTPO
LED
AUDIO 2
MIC/LINE
Key