Guide DF Integration
Issue No: A
Page: 11
Ref: DragonFly Installation Guide
Copyright © 2020 IMT and Vislink are Vislink Technologies Inc. companies
Table 3-2 - IMTDragonFly Connectors - SDI Version
Reference
Description
Type on Unit
Mating
1
SDI Input
MMCX - Female
MMCX - Male
2
Wi-Fi Output
Embedded Antenna
n/a
3
RF/900MHz Output
MMCX - Female
MMCX - Male
4
Program
Micro USB
Micro USB
5
Power/Serial Port/Remote
Molex - 501568-0807
Molex 5013300-800
Pins - 501334-0100
6
Camera Control
JST_SM06B-SURS-TF-6PIN
JST_SUHR-06V-S-B
Pins - SSUH-003T-PO.15
3.4.1.
Power and Serial Connector
The 8 pin Molex (Reference #5 above) contains both power and serial bus connections. The
connector is as follows:
•
DF Part Number
–
Molex 501568-0807
•
Mating Connector
–
Molex 501330-0800
Table 3-3 - IMTDragonFly Power and Serial Connectors
3.5.
Camera Power and Control (SDI Only)
The 8 pin Molex (Reference above #5) contains both power and 3 serial bus connections.
The connector is as follows:
•
DF Part Number
–
JST_SM06B-SURS-TF(LF)(SN)
•
Mating Connector
–
JST_SHR-06V-S-B
Table 3-4 - IMTDragonFly Camera Control Pinout
PIN
Type
Description
1
Power
6.5-16VDC
2
GND
Ground
3
S-Bus
Serial - 0-3VDC
4
Serial - CC with HDMI
RS422/485 - minus (HDMI Version)
5
Serial - CC with HDMI
RS422/485 - plus (HDMI Version)
6
GND
Ground
7
Serial - Remote Control
RS232- RX In
8
Serial - Remote Control
RS232- TX In
