Vislink ARTR, Руководство пользователя

Страница: 35 / 38

Issue No: C Page: 31
Ref: ARTR-ASUM-7001 Copyright © 2017 IMT Ltd, trading as Vislink
6W Connector fitted to ARTR unit AMP MS3470W-10-6P
6W Mating cable plug AMP MS3475W-10-6S
600mA nominal @ +28V DC
1.2A peak @ +28V DC
Recommended circuit breaker 3A
PINOUTS
PIN FUNCTION COMMENTS
A
Switch Common Fi28V feed via internal 0.5A resettable fuse
B
Retract
Short to pin (A) for retract, note for safety, unit will assume
retract unless extend is active. This connection is not mandatory
for operation
C Extend Short to pin (A) to extend the unit
D GND -
E +28V DC Aircraft supply.
F
Limit Switch Common
Opto-isolated FET drive level via 0.5A resettable fuse. Becomes
GND when either end travel switch detected. This line will toggle
at 1Hz during motor travel. And 10Hz if a positioning error has
been detected
Table B-1 Actuator Unit Pinout Table
6W Chassis Connector AMP MS3470W-10-6S
6W Mating cable plug AMP MS3475W-10-6P
3W Chassis Connector AMP MS3470W-8-33P
3W Mating cable plug AMP MS3475W-8-33S
For 6W Connector pinout please refer to table above. The interconnecting loom has pin to
pin connectivity.
PINOUTS
PIN FUNCTION COMMENTS
A
GND -
B
+28V DC Aircraft supply, internally fused and reverse polarity protected
C
Not Connected -
Table B-2 Hand Control Unit Pinout Table