Visive Hi-Lite 30 Border, Руководство по установке

Страница: 7 / 12

Page 5 Hi-Lite™ 30 LED contour tube specification & installation v6 – June 2021
Visive Group Limited
Ash Road South, Wrexham Industrial Estate, Wrexham, LL13 9UG +44 (0) 1978 660181
www.visivegroup.com
The installation (continued)
13. Hi-Lite™ 30 tube sections can be run
up to the edge of external corners. It is not
recommended to overlap the sections.
3M
3M
14. ‘Y’ splitter adapters can be used with
Field Adjustable Sections to enable the
electrical circuit to continue (around corners
for example). The ‘Y’ adapter can be hidden
behind the tube in the same way as a
standard connection.
15. If a connection cable needs to be
shortened, this can be done using two 3M
Scotchlok gel-filled pigtail connectors, such
as type UY2. The completed connection can
be hidden in the tube channel as shown.
3M
3M
3M
3M
Connection cable
3M Scotchlok
UY2 pigtail connectors
12. DO NOT butt sections up together.
Doing so will cause the sections to bend in
warm weather. Leave 10-15mm (0.4”-0.6”)
gap for thermal expansion. In very cold
weather a larger gap may be required.
If the Hi-Lite™ 30 sections are installed at a
2.4m (7’10½”) pitch, the required expansion
gaps will automatically be present.
10-15mm
(0.4”-0.6”)