VISIOR GAMES VISIDODGE, Руководство по установке

Страница: 9 / 12

CHECK 1
Pre-power up checkups
Mounted onto a construction designed for the game and in the right positions.
All buttons and targets are connected to the correct aggregator boxes.
Tighten all the connectors, the can bus cables and target cables.
Make sure the ethernet cable and DC power is connected to the computer.
Make sure the display is connected with HDMI and power cables.
All fixings are tight and secure.
No signs of damage, component failure and/or missing parts.
No trapped and/or pinched cables.
No loose cables that could become a tripping hazard.
Make sure there is no strain on the cables and the connectors.
All electrical components are away from contact with water and heat sources.
CHECK 2
Power up
All targets light up for a brief moment.
The display is turning on.
Game start screen appears on the display after around 1 minute.
Go! sound is heard at startup.
All targets are dim before the start of the game.
The start button lights up.
CHECK 3
Final check
The clock starts the countdown on the display.
All targets flash when hit.
Sounds can be heard when the targets are hit.
The score is registered on the display.
Hit every target and check if the score is added to the correct side.
CHECK 4
Ready for use
Play area is clear.
Installation checklist
www.visiorgames.com
9