t
+44 (0) 1246 225 745 |
e
w
visiontrack.com
2
Before you begin installing and commissioning the system, please ensure that you have
read this manual thoroughly referring to any supplementary information provided for the
unit as required.
Care must be taken in the routing of all cables so that the insulation does not become worn
or damaged.
Unauthorised modification to this equipment or associated accessories is unadvised
without the expressed permission and agreement from the product manufacturer.
This equipment should not be operated in hazardous environments i.e. areas that contain
explosive materials or flammable vapours.
This equipment should not be operated within aircrafts or in close proximity to medical
equipment.
This equipment may only be located in a position where it cannot interfere with the normal
operation of the vehicle or present a hazard to the driver or passengers.
Failure to comply with the following Warnings, Approval and Safety information may
invalidate warranty, certification or type approval of this product.
All installation and service work must be carried out in accordance with FCS1362, FCS1372,
RQAS, 95/54/EC, ISO 21609 and / or any other statutory guidelines or Directives currently in
force. Therefore it is strongly recommended that the unit is installed and commissioned by
suitably trained and qualified installation personnel with accreditation.
Under no circumstances may any part of the product be installed inside the engine
compartment area.
Unauthorised changes or alterations to the equipment or the installation will invalidate
certification issued by the Approved Accreditation Bodies and may also affect the vehicle
manufacturers warranty.
To avoid interference the VisionTrack power supply MUST be installed as far away as
possible from other telematics devices and power supplies already installed within the
vehicle. Ideally, installation should be on the opposite side of the vehicle.
Important Information:
VT3000-AI INSTALLATION GUIDE
