t
+44 (0) 1246 225 745 |
e
w
visiontrack.com
13
Open the "
ADAS
" menu, set the Mode Type to "
Calibration
" then click save*.
Refer to the live view again, 3 horizontal line should show in the image for reference.
Adjust the ADAS camera lens angle (remove the ADAS camera cover on the back) that
will allow the 30m reference line up with the reference point
DE
as mentioned above*.
VT3000-AI INSTALLATION GUIDE
*You may need VT Commission Support for this step. Refer to the Commissioning section on
page 19
.
