17
Setting in TIME MISMATCH
When the time of DVR is set earlier than the time of the last video data on HDD, the following message is
displayed.
Selecting “YES”: the video data between “SYSTEM TIME” and “HDD LAST TIME” will be deleted.
Selecting “GO TO TEST MODE”: Select only the video data between “SYSTEM TIME” and “HDD
LAST TIME” must not be deleted. Otherwise, do not select “GO TO TEST MODE”.
2-4. DLS (Day Light Saving) time setting: Summer time setting
1. Go to DLS field using Up/Down arrow button and select ON using Right/Left arrow button. Then the
summer time fields are displayed.
2. Select BEGIN field using Up/Down arrow button and press the SEL button. Then DLS BEGIN screen is
displayed.
3. Select the date and time that is be changed using Right/Left arrow button, change a value using
Up/Down arrow button, and press the SEL button.
4. After exit from BEGIN field setting, select END field using Up/Down arrow button and press the SEL
button. Then DLS BEGIN screen is displayed.
5. Select the date and time that is be changed using Right/Left arrow button, change a value using
Up/Down arrow button, and press the SEL button.
CAUTION:
-DLS can’t start from 23:00
-DLS can’t be applied, if the date of BEGIN and END is same.
