VisionNet ADSL 201ER Скачать руководство пользователя страница 5

Страница: 5 / 66

FCC Information

Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates radio frequency

energy and if not installed and used in accordance with the instructions, may cause harmful interference

to radio communications. However, there is no guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful interference to radio or television reception,

which can be determined by turning the equipment off and on, the user is encouraged to try to

correct the interference by one or more of the following measures:

※

Reorient or relocate the receiving antenna.

※

Increase the separation between the equipment and receiver.

※

Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

※

Consult the dealer or an experienced radio/TV technician for help.

Notice:

Any change or modification not expressly approved by the Guarantee of the equipment authorization

could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference and,

(2) This device must accept any interference received, including interference that may cause undesired

operation.

The class B digital apparatus meets all requirements of the Canadian Interference - Causing Equipment

Regulation.

Cet appareil numerique de la class B respecte toutes les exigences du reglement sur le materiel

brouilleur du Canada.

Содержание ADSL 201ER



































































Результаты поиска

Содержание ADSL 201ER

Отзывы:

Похожие инструкции для ADSL 201ER

Бренды по названию

Популярные бренды

VisionNet ADSL 201ER, Руководство пользователя

Результаты поиска

Содержание ADSL 201ER

Отзывы:

Похожие инструкции для ADSL 201ER

Бренды по названию

Популярные бренды