36
Supplier:
RIP advertisements are transmitted in intervals depending on your setting for
Interval
.
Select the
True
to enable or
False
to disable this function from the pull-down menu.
Gateway:
When the value of
Gateway
is
True
, RIP advertisements include a default gateway.
Multicast:
When the value of
Multicast
is
True
, received broadcast RIP messages are ignored, and received
multicast RIP messages are accepted.
Interval:
Enter the timing of how many seconds you want to transmit RIP messages when you set as
True
. The default interval is
30
seconds.
Handshake Protocol:
In the
Handshake Protocol
bar, you can use the pull-down menu to select the handshake
protocol supplied by your ISP. The factory default is set to
Autosense-G.dmt first
.
Note: The chart below is for your reference and contains the most common setup procedures.
Please keep in mind that your ISP
’
s configuration may not be the same as below.
Содержание ADSL 201ER
