21
6. Wiring Diagram
Terminal Details
MOTOR
LED LEARN
F
U
S
E
Code
L 3
N 2
1
1 2 3
TEST
Value
SET
+
LEARN
:
Remote learning Button
1: Left--Normal model; Right--Toggle model
2: Left--Master drive; Right--Slave
Note: After adjusting the DIP switch, the function
will not take effect until the power is turned off
and restarted
4 5 6 7 8
1 2 3
9 10 11 12 13 14
18 19 20
15 16 17
UPS+
UPS-
El-lock +
Anti-collision(open)
Anti-collision(close)
FULL
LOCK
Interlock(out)
Interlock(in)
Synchronous(out)
OPEN B
OPEN A
GND
GND
COM
GND
+12V
+12V
+24V
+24V
Synchronous(in)
Note:
After adjusting the DIP switch, the function will not take effect until the power is turned
off and restarted.
1. Left--Normal model; Right--Toggle model
2: Left--Master drive; Right--Slave drive (For double open system)
3: Select direction of the door opening
(Learning methods: Push the door to half open and switch on the power. If the door opens
slowly and then closes slowly, then there is no need to adjust this DIP switch; If not, adjust the
DIP switch and repeat the operation)
Button
Test:
Testing button, press one time, the door open and close one time
Learn:
Learning wireless accessories (remotes or wireless push button); One short press of the button
can eliminate the sound of the controller buzzer, and another short press can restore the sound of the
controller buzzer.
LED Indicator Light
L1. Wireless accessories learning (blue)
L2. Master door LED, when setting the master door, flash after 4 seconds (Red)
L3. Slave door LED, when setting the Slave door, flash after 4 seconds (Green)